We participate in the Amazon affiliate program and may earn a commission if you make a purchase through links on our site. We also participate in other affiliate programs.

Geeetech A10 Review: A low cost and budget friendly 3D printer kit

As far as printers go, you can’t make them less inexpensive than the machines produced by Geeetech. In the Geeetech A10m review, we will discuss the A10, which is by far and large, one of their most popular and inexpensive printers to date. Let’s learn more in this Geeetech A10 review:

GEEETECH A10 3D Printer, Fast-Assembled Aluminum Profile DIY kit, with Open Source firmware, Breaking-resuming, High Adhesion Building Platform, Stable Movements on V-Slot Rails, 220×220×260m

An Overview

The good people at Geeetech have tried to make sure that they have created their A10 3D printer keeping simplicity in mind. IT uses an open-source GT2560 control board and the printer itself is extremely reliable as well as being one of the single most cost-effective 3D printers available in the market today. Apart from that, it is relatively easy to assemble.

Add to that the fact that it is very stable and creates high-quality prints every time, and you have yourself a winner. In this review, we will discuss the Geeetech A10 offering in some detail.

Salient Features

This Geeetech 3D printer has set the bar as far as the price for a really affordable 3D printer is concerned. This is an open-source printer so there is no reason to worry about any sort of legal issues whatsoever.

As a matter of fact, just about everyone can legally manufacture a clone and sell it. This is precisely what Geeetech has done its A10 3D printer. Some of its salient features include the following:

It is Quite Easy to Build

Unlike many other full-scale printer kits, the assembly procedure of the Geetech A10 is extremely straight forward. The unit mostly comes pre-assembled right out of the box and it has also been thoughtfully provided with a dedicated set of its own tools for good measure.

The user simply has to attach the upper gantry system to its lower counterpart. Once done, you will have to mount the main power supply unit. Finally, attach the LCD screen and your printer is complete. Just add the spool holder for the filament and you will be completely ready for your very first print. If there are any issues you can simply refer to the two-page quick start assembling and operating manual.

It will carefully guide you throughout the whole 5 step building process and you should be done within half an hour or so, max. Now you can start printing whatever you want. The total time from start to finish would be less than 60 minutes at most.

Medium Size Build Volume

The overall build volume of this unit is approximately 220 x 220 x 260mm. This allows the Geeetech A10 to print one full centimeter higher than most other competitor printers such as the Ender 3.

However, there are other printers that printer higher than that, such as the Creality CR-10 that offers 300 x 300 x 400mm. Conversely, the Monoprice Mini Select clocks in at 120 x 120 x 120 mm, while the Prusa i3 MK3 offers a nominal print volume of approximately 250 x 210 x 200mm or so.

A “Super Plate”

Just because it says super does not necessarily mean that it is precisely that. However, in this case, the good people at Geeetech offer an interesting and viable concept. The printer glass plate has been covered with a very thin layer of minute dots that combined; increase the adhesive nature of the print bed once it becomes hot.

It is very easy to remove the finished 3D prints once the bed is allowed to cool down after the printing job is finished. In fact, the 3D printed objects have been known to just simply pop off with an audible and satisfying sound.

However, you will need a spatula and a lot of elbow grease to get the job done in one quick and clean move.

It Has Its Very Own Dedicated Slicer

Geeetech offers its own software that is known as Easyprint 3D. It is available for free and its many versions can be used for Windows, IMac, as well as Linux based operating systems (OS).

This is a very user-friendly slicer and you can learn to use it very easily, indeed. If you don’t like it, you can always use Cura and create your very own printer profile there.

The A10 Printer also includes the following features:

  • Its classy blue and black color combination chassis makes it look both solemn and simple.
  • It has a reasonably large build volume of 220x220x260mm³. This enables the A10 printer to make large objects and also allows you an unrestricted view of the printing details while the printer is working.
  • The large size also allows you to make the very best of the building platform so that you can optimize your builds.
  • This printer also features printing accuracy of approximately 0.1 mm. This enables the A10 to deliver absolutely exquisite prints complete with a sleek contour delicate texture as well as a uniformly stable structure.
  • The V-shaped rails and wheels on each axis have been constructed from a very strong wear-resistant aluminum profile. They help to reduce the ambient printing noise of this printer.
  • The A10 printer comes with its very own open-source GT2560 control board. Since it is not proprietary hardware, you will have near-limitless space for modifying all the firmware till you can tweak and fine-tune your printer as per your desired specs.

Old-School Display

The A10’s Ender 3 counterpart comes with its very own high-resolution display, while the Geeetech has been equipped with a retro calculator lookalike (liquid crystal display) LCD screen.

Optional Wi-Fi Dongle capability

Geeetech now offers an optional Wi-Fi dongle for this machine. This way, you will be able to access your A10 printer directly from your laptop, PC, or even a smart device. This inexpensive upgrade costs around $20.

Components

This printer has a pretty interesting choice of components. Apart from the fact that the power supply offers 24 V, the main board of the printer is a custom-built rig. It is an open-source Geeetech GT2560.

In fact, the motherboard has been professionally encoded so that it will be able to support the automatic update function for this printer. All you need to do is to connect the auto-leveling sensor to the net.

The whole operating process will be able to save on labor and wear and tear of your 3D printer. Apart from that, it will also significantly improve the adhesion of the first layer. Finally, the wiring is also very good and the machine is as electrically safe as possible.

Accuracy

This is a surprisingly accurate machine, especially when compared to the many other 3D printers available in the market today. This has a lot to do with the fact that it has very sturdy fittings and the machine does not vibrate very much

Convenient Reset Button

The reset button effectively ensures that you can commence work from where you had left off.

Technical Specifications of the Geeetech A10

The current technical specifications of the Geeetech A10 printer include the following:

  • Nozzle: Single 0.4mm
  • Print volume: 220 x 220 x 260mm
  • Heated bed temperature: 100℃
  • Filament: 1.75mm
  • Maximum extruder temperature: 250℃
  • Layer resolution: 0.1 – 0.4mm (100-400 microns)
  • Maximum print speed: 180 mm/s
  • Compatible with 3rd party filament: Yes
  • Print precision: +/- 0.1mm
  • Connectivity: SD card reader
  • Compatible with 3rd party filaments?  Yes
  • LCD screen: Yes
  • Packing type: Unassembled kit
  • Printable materials:  PLA, PETG
  • Filament diameter:  1.75 mm
  • Connectivity: SD card, USB
  • Print Auto recovery: Yes

Pros

  • Quite an easy assembly procedure
  • Fine quality print
  • It is very easy to upgrade this printer in the future
  • Well-designed build platform
  • A very quiet machine

Cons

  • This is printer has not been equipped with a Duel Z lift setup
  • The power supply unit (PSU) is not sturdy as it should be
  • No external Mosfet available for the heat bed in this printer kit
  • The printer’s hotend needs more attention to detail
  • The machine is a bit crude and lacks in the quality control (QC) department

Various Upgrades and Modifications for this Printer

Let us take a look at some of the more popular upgrades for this printer:

  • You can replace the original plug with a T60 one
  • The power supply is quite good, but you may upgrade it to a more powerful one
  • You should consider covering the exposed solder point on the heat bed of this printer kit
  • You can both design and subsequently upgrade the hotend for a full Fang setup over its original one
  • Add a filament run-out sensor
  • A bed leveling sensor will make the manual bed leveling procedure pretty easy
  • You can get a bigger LCD screen
  • Finally, you can also upgrade its Firmware

Our Impression

This is a very impressive printer kit; there is no doubt on that score. From the initial unboxing of this 3D printer kit to the first print, everything was flawless. In fact, there were no real problems that we faced, apart from a few minor inconveniences during the assembly procedure.

You will definitely find yourself spending a lot of time with this printer, once you get well and thoroughly bitten by the 3D printer kit bug. Yes, it is by no means the very best 3D printer kit in the market, but then, it is also not an expensive printer as such. In a nutshell, you get what you pay for and you are definitely getting a lot with this particular printer package.

Overall Build Quality

The V-Rail construction can be justifiably referred to as the top of the line. A really great thing about it is that the two axis have their own individual spacers for adjustment purposes.

This is a very strong feature not commonly available in any other unit in this price range. There are very few 3D manufactured parts in this machine. Most of them have been commercially made in a factory and this definitely gives a much better quality feel about the whole thing.

Print Quality of this Printer

First layer adhesion is absolutely top-notch. In fact, you will get amazing results straight out of the box. If you have any sort of prior experience with the art and science of 3D printing, you will love the sheer tweak-ability of this printer.

This holds particularly true if you know your way around the slicer program of this printer. You will be able to get simply amazing results. So yes, the print quality is right up there and it punches well about its weight in the quality department.

User Interface and Navigation

The LCD is pretty basic but it is nonetheless pretty easy to get around its menu. It’s a plain vanilla design and its very simplicity makes it an ideal choice for newbies. However, it does leave a lot to be desired in the interesting features department. This is not an issue due to its unique design and you can easily upgrade the firmware anytime you want, in the future.

It is a bit of a shame that they installed such a tiny LCD on this otherwise great printer. But as was said before, this too can also be fully modified as an upgrade on this printer.

Geeetech A10 vs Ender 3

Of course, the Geeetech A10 has a whole lot of competition in this extremely fast-paced market, where new models are rolled out every few weeks. Pick up any number of reviews and you can see that its closest competitor is Creality Ender 3.

In fact, both of these printers are almost at the same level as far as the really important stuff is concerned.

The basic differences are mostly trivialities: If the A10 sports new and improved shaped wheels so does the Ender 3 with a near-identical set of large level wheels. The A10 has a better power supply cover and heat bed thanks to its lack of dents.

The Ender-3 has a much larger community, thanks to its widespread popularity amongst the 3D printing community at large. However, this does not mean that Geeetech is far behind since it too has multiple Facebook groups as well as an official forum too.

In every channel, the company makes it a point to comment and guide as much as possible. Certainly far more than its Creality counterpart. Both have roughly similar feeders that are strictly functional.

Yes, it may be true that Ender 3’s display is a tad bigger, but then, the A10 is a whole lot faster to set up. Finally, both these 3D printers give great prints.

Related

Conclusion: Why would you want to buy the Geeetech A10 3D Printer?

In a nutshell, the Geeetech A10 delivers. It is a great printer at an affordable price and its print accuracy is second to none at its given price point. From the very first time you boot up till well over hundreds of prints, the odds are that this machine will give you it’s very best and you will gradually fall in love with it.

Best of all, it is a rugged, reliable, and durable machine that will be an excellent introduction to the wonderful world of 3D printing.

Buy on Amazon

Leave a Comment

shares